A model name can survive longer than its measurements. One to Sit’s Original and Barok pages make that visible: the same family appears in a 2019 collection overview and in a more detailed 2022 catalogue, but some numbers differ. Keeping the source beside the number is the difference between recognising a piece of furniture and specifying the wrong one.
This is a historical reading guide, not a current shop catalogue. It compares retrieved pages and an available product-information sheet. It does not establish which version an unlabelled second-hand piece belongs to, or what a supplier can deliver now.
Original was a collection, not a single table
The July 2019 collection capture separates dining furniture, a high table, chairs and sofas, a sunlounger and storage boxes. Its chair and sofa entries offer stainless-steel or hardwood handrails. The chair is listed as 720 × 940 × 770 mm; the sofa as 1650 × 940 × 770 mm. Those are dimensions attached to the source’s named objects, not a seating-capacity calculation.
The dining group lists table lengths of 4000, 3000, 2300 and 2100 mm, with stools and three couch lengths. Elsewhere on the same page, the high table is 2100 × 900 × 1080 mm and the sunlounger 2100 × 900 × 380 mm. Sharing a length does not make these interchangeable: height and use distinguish them.
The smaller pieces have their own entries too: a hocker at 860 × 610 × 380 mm, a pouf at 400 × 400 × 310 mm, and low table 165 at 1650 × 700 × 280 mm. Keep those object names beside the dimensions; a low table and an upholstered seat can occupy similar space without serving the same purpose.
The October 2022 Original Table page uses codes such as TO400, TO300, HTO210 and LT70. It also includes benches, chairs and cushions. Its title therefore describes a product group rather than every item underneath it.
A code is an identifier, not a ruler
Three entries show why the suffix should not be read as a measured dimension:
- TO400: the displayed dimensions are 4280 × 1120 × 820, with a listed weight of 80 kg.
- HTO210: 2550 × 990 × 1130, with a listed weight of 60 kg.
- LT70: 870 × 730 × 290, with a listed weight of 9 kg.
These dimension strings are transcribed from the 2022 page; the preserved text does not state a dimension unit. The 2019 source explicitly uses millimetres, but that does not authorise silently adding a missing unit to a different record. For an actual specification, obtain the dimensioned drawing for the exact code.
The difference is also more than a formatting issue: the older low table 70 is described as 700 × 700 × 350 mm. The recovered sources do not establish whether the later values reflect a revised product, another way of measuring or a catalogue error. Retain both records instead of averaging them or describing one as the correction.
Barok: rectangular and square references need separate labels
The 2019 Barok overview lists rectangular tables at 5000, 3200 and 2500 mm long, each 1250 mm wide and 760 mm high. It separately names an 1800 × 1800 × 760 mm square table. Benches and a stool complete the collection.
In the 2022 catalogue capture, TB500 displays 5050 × 1270 × 770 and 100 kg; TB320 displays 3250 × 1270 × 770 and 70 kg; TB250 displays 2550 × 1270 × 770 and 55 kg. TB180 displays 1800 × 1800 × 770 and 60 kg. Again, the unit is absent from the preserved dimension text. These records can identify a reference without resolving all of its technical details.
There is a further trap in the February 2023 Barok page: although its breadcrumb names Barok Table, the retrieved product list contains four TOSS016 chair colours and no Barok table rows. That is what this capture contains. It does not prove that the tables were discontinued or that every earlier Barok specification remained valid.
Accessories have their own dimensions
On the 2022 Original page, TOB200 is listed at 2130 × 450 × 470, while KTOB200, described as a cushion for a bench, is 2000 × 400 × 50. The related number in their codes is useful for searching, but it does not make their outer measurements equal.
That distinction matters when examining an existing bench. Record the supporting surface and the cushion separately, then check the intended pairing. A cushion may cover a sitting area rather than the full outer footprint; these catalogue rows alone do not explain the geometry of a particular specimen.
Use the material sheet for its stated scope
The available fibreglass furniture sheet, page 3, names Original table and bench, Original High Table, Original Chair and Barok table and bench. It supplies placement and construction guidance for that documented range. It is a useful companion to the catalogue, not a drawing that resolves every historical measurement discrepancy.
For a practical identification note, keep four things together: the exact model code, the source and capture date, the measurements as written, and photographs or measurements of the actual furniture. Leave an unresolved mismatch visible. For different constructions and further changing specifications, continue to the Borra, Colla, Base and Placa comparison; for chairs appearing across these pages, use the Sera and cushion guide.
Download the historical catalogue-row transcription (CSV). Each row keeps its source and capture date; missing units and the unexplained zero weights remain marked. This is a reference dataset, not a current product specification.
